Introduction of Organic Fertilizer Production Line
Generally, organic fertilizer production line divides mainly into 2 parts: pre-processing, and granules producing. The main equipment on pre-process is compost turner. There are 3 kinds of organic fertilizer compost turners being provided by us–groove type compost turner, self-propelled organic fertilizer compost turning machine, and hydraulic compost turner. They own different characteristics which is more convenient for customers choosing whichever they like.

As for granules producing process, we manufacture high-quality, and high-output fertilizer machines, such as fertilizer mixer, fertilizer crusher, new type organic fertilizer dedicated granulator, fertilizer polishing machine, organic fertilizer screening machine, fertilizer coating machine, and automatic fertilizer packager etc. All of them can meet the demands of large yield and environmental-protection organic fertilizer production.

We manufacture the fertilizer machines by ourselves, so we provide customers with more quality-warranty and energy-saving products. Besides, we can assemble not only organic fertilizer production line with 20,000 tons output, but 30,000 tons, 50,000 tons, and even larger yield.

20000_ton_organic_fertilizer_production

Main Components of 20,000 ton per Year Organic Fertilizer Production Line
The organic fertilizer production line is mainly made up of compost turner, fertilizer crushing machine, mixing machine, granulation machine, drying machine, cooling machine, screening machine, organic fertilizer coating machine and automatic packager etc.

organic_waste_composting1. Fermentation process:
The fermentation of bio-organic raw materials plays quite a fundamental role in the whole production. Sufficient fermentation lays a solid foundation for the quality of the end products. All compost turners mentioned above, each has its merits. Groove type compost turner and groove type hydraulic compost turner can thoroughly compost and turn high-stacked fermentation materials with large production capacity. Self-propelled compost turner and hydraulic compost turner, which are suitable for various organic matters, can work freely outside or inside the factory, greatly increasing the speed of aerobic fermentation.

2. Crushing process:
Our semi-wet material crusher with high-speed rotating blade is a new type and high-efficiency single reversible crusher, and has strong adaptability to high water-content organic matter. Semi-wet material crusher is widely used in the organic fertilizer producing process and it performs well in crushing chicken manure, sludge and other wet materials. This fertilizer crusher greatly shortens the production cycle of organic fertilizer, and saves production cost.

20000_ton_organic_fertilizer_granules3. Mixing process:
After being crushed, raw materials should be mixed evenly before granulating. Double-shaft horizontal mixer is mainly used to humidify and mix powdery materials in the fertilizer industry. As the spiral blades have multiple angles, raw materials can be mixed quickly and effectively, regardless of their shape, size and density. Our double-shaft horizontal mixer, with its larger capacity, is deeply loved by our clients.

4. Granulating process:
Granulating process is a core part in the production line. Our new type organic fertilizer dedicated granulator is a wise and perfect choice for customers to granulate high-quality and uniform-shaped organic fertilizers, the purity of which can reach as high as 100%. Different from the conventional ways of producing organic fertilizer, it can make your producing process more efficient and energy-saving.

5. Drying and cooling process:
We manufacture rotary drum dryer and rotary drum cooler for fertilizer drying and cooling. Rotary drum drying machine uses hot air to reduce the moisture content of fertilizers. After drying, the moisture content of compound fertilizer will be reduced from 20%-30% to 2%-5%.It adopts new combined type lifting board to avoid materials wind tunnel phenomenon, which helps to improve the heating efficiency.
The fertilizer cooler has been an essential and indispensable part in the whole fertilizer processing. The rotary drum cooling machine is used for cooling fertilizer with certain temperature and particle size in fertilizer industry. By the cooling process, the material can be removed about three percent of the water. It also can combine with the rotary dryer to remove the dust and clean the exhaust together, which can improve the cooling efficiency and the rate of thermal energy utilization, reduce labor intensity, and further remove moisture of the fertilizer.

organic fertilizer production line

6.Screening process:
After cooling, there is still powdered materials in the end products. All fines and large particles can be screened out using our rotary drum screening machine. Then, fines being transported by belt conveyor are back to horizontal mixer for remixing and re-granulating with raw materials. While large particles needs to be crushed in chain crusher before re-granulation. Quasi-finished products are conveyed into organic fertilizer coating machine. In this way, a complete production cycle is formed.

7.Packaging process:
This is the last process. Our automatic quantitative fertilizer packager is an automatic and intelligent packager which is specially designed, manufactured and tailored to different irregular materials and granular materials’ needs. Weighing control system is designed in accordance with the requirements of dust-proof and waterproof. Feed bin also can be equipped according to customers’ demands. It is suitable for large-volume sub packaging of bulk materials, and is automatically weighed, conveyed and sealed in bags.

Advantages of 20,000 ton per Year Organic Fertilizer Production Line
1)High output
With an annual production capacity of 20,000 tons of organic fertilizer production line,annual disposal volume of excrement can reach 80,000 cubic meters.

fertilizer_market2)Best quality of finished fertilizer
Taking livestock manure for example: The overall excrement of a pig per year with a combination of bedding materials can macerate some 2000-2500 kilograms high-quality organic fertilizer, containing 11%-12% organic matters(0.45% nitrogen,0.19% di-phosphorous pentoxide and 0.6% potassium chloride etc.), which is enough for an acre of field to meet its demand on fertilizer all the year around.

The resulting fertilizer produced by our organic fertilizer granulation riches in various nutritive components with the content of above 6%, including nitrogen, phosphorous, potassium etc. Its content of organic matters is above 35%, both of which are higher than national standard.

3)Great market demand brings the good profitability
An organic fertilizer production line can meet the demand on fertilizer for the locals as well as the neighboring market. Bio-organic fertilizer is widely used in farm fields, fruit trees, landscaping, upscale turf, soil improvement and other areas.

Technical Data of 20,000 T/Y Organic Fertilizer Production Line

Product  Item
Model
Motor Power
(kw)
Prod Capacity
(t/h)
Weight
(t)
Inclination
Dimension
L x W x H(mm)
Semi-wet Material Crusher
ALCBSFS-40
22
1-2
960*560*850
Horizontal Mixer
ALCZYQ-QZ 400
20
2.35
Rotating dia:400
New Type Granulator
ALCYSL-80
45
2-4
Polishing Machine
ALCPYS1000
11
2
3100*1020*1390
Rotary Drum Dryer
ALCZG15150
15
5-7
2-5
Shell L x inner dia:
15000*1500
Rotary Drum Cooler
ALCLQ12120
7.5
2-5
Shell L x inner dia:
12000*1200
Rotary Drum Screening Machine
ALCGS1.2×4.5
3.0
3-5
2.5
2-2.5
Shell L x dia:
4500*1200